Fast and instant heater with NTC sensor
Basic Info
Model No.: JD30 3300W/220V 10C
Product Description
Fast and instant heater with NTC sensor
The big difference with other thick film heating element, fast and instant heater with NTC senor has NTC sensor on both water inlet and outlet. It can touch the water temperature more accurate, and the you can get more accurate hot water at target temperature.
As a new type Instant electric fluid heating element , thick film water heating element is larger heating area (Tubular Structure), higher power density (100w/cm2), faster temperature ramp up (150℃/S), longer life span (>10,000hours) and better thermal transfer (≥98%).
Instant electric fluid heating element's high power density makes the temperature ramp up quickly, thermal should be taken away fast. So that we design it in tubular structure, which allow water flow inside tube. The electric heating circuit is made on surface's insulation layers, covered by another insulation layer. Electric and water flow are insulated.
On the basis of the thick film heating tube, we develop thick film heating element. Instant electric fluid heating element assemble is made up by stainless steel thick film heater, plastic shield, interface connectors, thermostats, NTC Sensor, wire socket and so on.
Advantages of fast and instant heater with NTC sensor
Fast and instant heater with NTC sensor is advanced in power density(>100W/cm), quick temperature ramp-up rate(80℃/S) and high thermal transfer(98%). You can get boiling water(≥95℃) in 3 seconds around.
For applications where space is limited, this simple profile heater offers high thermal power density and fast response times to heat up or cool down (due to low thermal mass)
This electric heating element can be matched with thermostats (automatic reset and/or manual reset) and circuit control board.
Thermostat can directly access heating power supply circuit to control it connection or disconnection. Circuit Control Board can adjust the outlet water in multiple temperature levels.
Origin of thick film
The thick film heating technology is new type of heating technology which is developed mainly by DuPont and Heraeus in 1990s. They invent the electronic paste which can be used on the stainless steel substrate firstly.
Thick film constitution
Finished product form
A instant electric thick film heating tube was covered with a dense layer of microcrystalline glass film on the surface, which is not easy to be abscised and scratched.
Using the technology of silk-screen printing and high temperature sintering, the thick film heating tube was covered in order by sinter dielectric layer, resistance layer, silver conductor layer and isolation glazes protective layer.
The parameters of Instant electric fluid heating element
| Product Model | JD30 3300W/220V 10C | Product application | Water dispenser/Water purifier |
| Product Size | 161mm*78mm*46mm | Fixing manner | Fix from sides/Fix from end |
| Tube Size | 030mm*110mm | Water inlet&outlet connector size | Φ10mm |
| Standard Power/Voltage | 3300W(+ 5% ~ -10%)/230V | Lead time | 25 Days |
| Optional power | ≤3300W | MOQ | 1000 pieces |
| Electric strength | ≥1250V/5mA/60s | Main Components | Heating tube/connector/thermostat, Temp.sensor/sprial column |
| Bearing Pressure | ≤0.2Mpa | Product certification | CQC,ROHS,Wading health approval documents |
30mm thick film heater has many options of power/volatage and interface size of inlet and outlet, Φ16mm Φ10mm G1/2 G1/8.
The most compact instant type heating element is the ideal heating element for novel and fashionable home appliances such as Water Dispenser, Electric Water Faucet, Water Purifier, Coffee Maker, Milk Machine, etc.
Some of our Thick Film Electric Heating Tubes are individual customer solutions which are designed to match our customers` individual and specific requirements. During the development and application stages we work closely together with our customers in a partnership based on trust and mutual confidence.
Instant electric fluid heating elementuse precautions
1, The product temperature rising rate is greater than 80 ℃~150℃/S, so, please ensure that the tube is filled with water before use.
2, The pipe must be installed vertically when heating liquid, the direction of liquid flow is from the bottom up. To avoid local dry burning, please add water at first, and then connect to power.
3, Based on different powers, the user should ensure the minimum flow, while ensuring smooth water access to the pipe, so as to avoid vaporization and dry burning.
4, Pay attention to the surface heat dissipation; and due to a big power density, please also pay attention to the rate of heat exchange.
Brief introduction of our Company
Xinxiang jieda precision electronics co., ltd. was established on the year of 2012, and it was located high-tech economic zone of Xinxiang city of Henan province, which is very near to zhengzhou.
During 6 year of development, now Jieda becomes the leading brand in the thick film heating element field. We are specialize in the in the R&D, manufacture and sale service of stainless steel thick film heating element.
The founders of Jieda spent 7 years and energy on the R&D of thick film printing on curved surface, and over the years, we have been working on the improvement and perfection of this technology to make our products more superior.
In cooperation with well-known household appliance brands, such as Haier, Midea, Kohler and King Clean, the the total sale`s volume exceeded three million pieces. And we hope dyson would be on our partner`s list after further mutual understanding and cooperation. Now Jieda is in the stage of sustainable and healthy development, we hope to cooperate our partner in different application field.
Product Categories : Eelectric Heating Element > 3300W Electric Heating Element